Skip to main content

How are air samples taken from a sealed place in an underground mine?

How are air samples taken from a sealed place in an underground mine?

 We know that there is a lot of gas in the mine, in which some gases are very deadly, so it is also dangerous to take samples of them, let us see how the samples are taken from the sealed area. To take a sample, the glass sampling bottle is thrust on one side by a rubber groove with the nipple of the pipe engaged in the stopping and on the other by a suction pipe. After running the pump after opening the pipe wall of the sampling sample, the air inside the sample is filled in the bottle. Then the sampling pipe wall closes. Put a lid in the mouth of the bottle and write the stopping number, date, time, and name of the sample taker on the outside paper.

It is okay to take such a sample between 12 am and 2 pm because the air pressure is low at that time and the gas tries to get out of the sealed area. And the sample gets right. This process has to be done very carefully because if there is any mistake, then the sample starts to say wrong. Only the mining engineer does this work. Because not everyone has the right to check the gas.

Comments

Popular posts from this blog

Where is open pit mining located location and quotes?

The number of opencast mines is more in the mining sector nowadays and new opencast mines are also opening in large quantities. The main reason for this is that it is easier and cheaper to extract coal from opencast mines. And there is less risk. Put big machines in it and do more production in less time. Now opencast mines are opening everywhere in India and some are already open. Opencast mines are very high in all these states. Jharkhand, West Bengal, Odisha, Madhya Pradesh, Andhra Pradesh, Maharashtra are full of opencast mines in all these places. And some are very old food and some new ones are opening.

Sir now I am reading in mining engineering in diploma I want to read niser can I do after diploma

After doing a diploma you have to do 1-year vocational training (PDPT)practical from any mine. After the permission of the manager or general manager in any mine, you take one year of practical training there only then you will be eligible for the post of mining engineer and overman in any mine and can apply. See here is the course of the mining as follows After 10, you have to do 3 years diploma from any private or government college and after that, you have to do one year of field training PDPT because without this you will not be able to face the gas testing exam. Only then will you be eligible for a mining engineer or mining overman. If you do a diploma even after 10 + 2, you have to do it in the same way as after 10. Because( PDPT) post-diploma practical training is necessary. If you have to do B-Tech then 10 + 2 is mandatory. You cannot do B-Tech without 10 + 2.B-Tech is 4 years old, you can do it from private or government college from anywhere. There is no difference in the

Duties and responsibilities of mining engineer.

Responsibility: -1. Protection of the statements given under him. 2 . Getting production done and other work done by the manager. 3. Examining and supporting the movement of the workplace and paths. 4. Control the work of all persons and provide protection to all workers. 5. Pay special attention to all these things like air, gas, water, fire in the mine. Duties: -1. The mining engineer will follow the orders of the above officers and get them all done. 2 . Will control the functioning of the entire area of ​​the district. 3. If anyone violates Khan's law, he will give the news to the overman.  4. Will work for everyone according to the regulation and will keep checking from time to time.